Selecting Roofing Systems. A roof designer should consider the factors that will cause the material to deteriorate and determine a system with the appropriate characteristics. Checkout McIntyre Construction LLC for more info. Depending on the roof system and the location of the project, the designer can determine the type of material to use and what characteristics are necessary to meet the project’s requirements. Some considerations are technical, while others are primarily financial. In addition to the material, the roof designer should consider how well the contractor knows the area.

Reliable Roofing Systems. A highly reliable roof requires more careful observation in the field. While some roofing systems are simpler than others, they pose additional challenges. Experienced roofing contractors should be aware of these challenges so that they can ensure the highest quality installation. Increased observation of these systems can also prevent inadvertent mistakes. Here are some tips on how to choose a roofing system. You should also make sure that the contractor you select has the necessary experience and training to complete the project.

A mechanically attached system may not be appropriate for buildings in high-wind zones. Mechanically attached membranes may cause air pumping and condensation problems. Reinforced membranes can also help prevent tear propagation. However, it may be difficult to determine the right system for your building in such high-wind areas. When evaluating the appropriate roofing system, always consult the specifications. If you are unsure about a certain roofing system, you can visit a local NRCA chapter for further details.

Polyisocyanurate (PUR) is another popular type of roofing material. It offers superior UV resistance, and the use of a tape-applied adhesive improves its reliability. A properly installed EPDM system is rated for 30 years of service life, but if you’re looking for a cheaper, easier to install system, Epichlorohydrin (ECH) may be an option for you. For a more environmentally friendly option, consider using an EPDM membrane and covering the top of it with a PVC cover board.

BUR: Built-up roofing systems are a popular option in North America. They consist of layers of asphalt or bitumen reinforced with fiberglass or organic mats. This roof is durable and long-lasting. Most building owners prefer BUR systems because of their proven track record and inventory. They can also be easily repaired and replaced, which saves a building’s money. These are just some of the many types of roofing systems you can choose for your building.

Metal Panels: Most metal panel systems are not considered suitable for low-slope roofs. However, some manufacturers tout systems that are suitable for slopes as low as 1/4:12 (2 percent). Roofing Systems utilizing hydrostatic and hydrokinetic membranes need a minimum slope of 1/2 inch per foot to be effective. The greater the slope, the greater the leakage protection it provides. It is important to note that these two types of roof materials have their advantages and disadvantages.

Life-cycle Cost: The lifetime cost of a roof includes the cost of initial construction, energy consumption, maintenance and repair, and the costs of disposal at the end of the roof’s service life. Most of these components can be salvaged or recycled, but you should not base your choice solely on warranty. However, the warranty of a roofing system should cover all materials and accessories used on the roof. Additionally, the warranty should cover basic wind speed.

Contact Info

McIntyre Construction LLC
105 Pittsfield Road
Loudon, NH 03307
Phone No. : (603) 856-3255