Installing turf is similar to installing a rubber base on a concrete surface, with the added benefit that it can be laid out ahead of time. The key is to lay out the turf flat, and allow a day or two for it to settle. If possible, use a helper to help place the turf. Never drag the grass, which can create uneven surfaces. Trim the edges as needed. Make sure you keep the grass off of electrical wires.If you’re looking for more tips, Orlando artificial turf has it for you.

 

Before installing the turf, lay down a layer of decomposed granite or base rock on the area. Then hose down the area to remove any excess dirt. Once the base is completely dry, spread the turf down. Once the turf is fully installed, it will be ready for use. Once the ground is level, you can add the infill (sand or rubber pellets). Once the turf is dry, you can install the drainage system, if desired.

When you’re installing the turf, be sure to level the area with a shovel. This will prevent drainage issues, and it will keep weeds from pushing up the turf. If the surface is not level, you can put weed barriers underneath to keep the weeds from growing in the area. Be sure to check for drainage, because different surfaces need different types. For example, a residential application of turf requires a higher level of infill than a sport-use application.

Once the turf is ready for installation, you should prepare the area with care. Ensure the area is level, and remove any debris. Inspect the soil and drainage system to ensure proper drainage. A professional contractor will evaluate the drainage system before laying the turf, and may need to modify it. Then, you should grade the area to ensure that it’s suitable for the type of turf you want. It’s also important to clear the area of existing plants and landscape elements.

It’s essential to prepare the area before you start the turf installation process. Before starting, you should prepare the area for drainage. You need to consider any obstacles that may exist, such as drains and planter beds. A 2% grade in the soil will allow the water to flow away from the turf and toward the base. If the ground is level, the ground underneath will be leveled. When the turf is installed, make sure it’s even.

Once the turf is laid, you should make sure it’s level and free of obstacles, such as drains, plants, and other elements. After this, you should cut the turf and lay the edges down flat, not burying the fibers. After laying down the turf, make sure to add weight to the seam. This will help the adhesive adhere to the ground. After the adhesive is set, you can trim the edges of the turf.

Contact Info

Artificial Grass Pros of Orlando
3424 Quail Nest Court
Orlando, FL 32829
Phone No. : (407) 214-4250